Featuring newly designed dbx® 60V high-voltage, ultra-low noise mic preamps on both channels, the I•ONIX U22 is more than equipped to provide professional recordings that keep your music sounding its best. The preamps run on a high-voltage supply to guarantee stability and provide you with a superior recording across a wide dynamic range.

I•ONIX U22 The I•ONIX U22 contains all the necessary tools to transform your computer into a professional 24-bit/96kHz digital recording studio. USB 2.0 Desktop Recording Studio 44.1kHz to 96kHz sample rates, 24-bit resolution Pantheon II VST/AU reverb plug-in with 6 legendary Lexicon reverbs dbx® 60V high-voltage, ultra-low noise microphone preamps Superior sonic performance 2 analog combi-jacks for mic/line inputs 2 analog 1/4" TRS balanced outputs Zero latency monitoring Low latency ASIO drivers Streamlined monitor form factor puts all recording controls at your fingertips Separate level meters and gain control per channel 1 side panel 1/4" instrument input 1 side panel headphone output with dedicated volume adjustment MIDI in and out Lexicon engineers are constantly working to improve the quality of our products. Specifications are therefore subject to change without notice. Computer System Recommendations Windows Microsoft Windows® Vista 32 and XP SP2 1.8 GHz CPU or faster 1 GB RAM Display resolution 1024x768 pixels DVD-ROM drive USB 2.0 Internet access required for software license activation Macintosh Mac® OS X 10.4.9 or higher Intel® Multicore system (Required) 1 GB RAM Display resolution 1024x768 pixels DVD-ROM drive USB 2.0 Internet access required for software license activation Microphone Inputs: Female XLR Pin 2 Hot Input Impedance: 3kΩ balanced Phantom Power: +48 Volts Maximum gain: +58 dB E.I.N. (at max gain): -125 dBu @ 58dB gain typical (150Ω source) -129 dBu @ 58dB gain typical A-weighted (150Ω source) Maximum Input Level: +21 dBu at minimum gain Frequency Response: +0/-1 dB, 20Hz - 20kHz THD+N: <0.006%, 20Hz - 20kHz (mic input to main output) 0 dBu input level, Input knobs at 11 o'clock <0.003%, 1kHz, +5 dBu input level, Input knobs at minimum, Output knob at max Line Inputs: 1/4" TRS balanced or unbalanced Input Impedance: 20kΩ balanced, 13kΩ unbalanced Maximum Input Level: +32 dBu Frequency Response: +0/-1.5 dB, 20Hz - 20kHz (reference 1kHz) THD+N: <0.004%, 20Hz - 20kHz (line input to main output) 0 dBu input level, Input knob at 12 o'clock, Output knob at max Instrument Input: 1/4" TS unbalanced Input Impedance: 1MΩ Maximum Input Level: +13 dBu Frequency Response: +0/-2 dB, 20Hz - 20kHz (instrument input to main output) THD+N: <0.004%, 20Hz - 20kHz, 0 dBu input level, Input knob at 10 o'clock, Output knob at max Line Outputs: 1/4" TRS balanced or unbalanced Level: >+18 dBu maximum Impedance: 32Ω Balanced, 16Ω Unbalanced Headphone Output: 1/4" stereo jack 350mW per channel at 50Ω MIDI Interface: 5 pin DIN connectors for MIDI in and MIDI out (5 volt signal) Sample Rate: 44.1, 48, 88.2, or 96 kHz (determined by computer application) Dynamic Range: A/D (24 Bit) 108 dB typical, A-weighted, 20Hz - 20kHz (44.1 kHz sample rate) D/A (24 Bit) 110 dB typical, A-weighted, 20Hz - 20kHz A/D/A (24 Bit) 102 dB typical, A-weighted, 20Hz - 20kHz Power Requirements: 12W 9VAC Power adaptors available for: US and Canada: 120 VAC, 60 Hz Adapter: PS0913B - 120 Japan: 100 VAC, 50/60 Hz Adapter: PS0913B - 100 Europe: 230 VAC, 50 Hz Adapter: PS0913B - 230 UK: 240 VAC, 50 Hz Adapter: PS0913B - 240 Australia: 240 VAC, 50 Hz Adapter: PS0913B - 240-AU

      Copyright © 2009 Audio Vengeance. All Rights Reserved.